Will the rubber transfer mark be blurred after vulcanization?

A hydraulic hose factory with an annual output of more than one million meters will be forced to stop work because the rubber transfer mark after vulcanization becomes blurred, falls off, or cannot be scanned. This not only increases labor costs, but also delays delivery time. So what should you do when the problem of blurred rubber transfer marks occurs?

First, the hose factory will check whether there are any problems with the operation, the formula of the hose, vulcanization time, water cloth winding, etc., and conduct a self-test first.

Secondly, there is the issue of vulcanized labels. If you purchase a low-priced rubber hose vulcanized label, you must immediately communicate with the vulcanized label manufacturer and let the factory test by itself to see if there are any problems with the material and ink of the vulcanized label.

As a factory with more than 20 years of experience in hose vulcanized strip printing, we insist on using imported high-quality film materials and high-temperature-resistant special inks to ensure that labels are still cleanly transferred, bright in color, non-fading, and non-warping in a vulcanization environment of 140-180°C.

More importantly, we provide free designs and free samples - you can truly verify the effect in your existing vulcanization process and switch suppliers with zero risk. Welcome to request free samples for testing.